Tenon Saws
Filter Options
£0 - £9.99 (4)
£10 - £19.99 (10)
£20 - £29.99 (1)
£20 and over (1)
£30 - £39.99 (1)
£60 - £69.99 (2)
£70 and over (1)
Loading...
End of content
Error - No more pages to load
Tenon Saws Information
The Tenon Saw gets its name from the tenon in a mortice & tenon joint, the cutting of which its one of its primary specialities. However, the average woodworker is perhaps most likely to use one in combination with a mitre box or mitre block, in order to obtain precise 90° or 45° cuts. Equipped with a fine toothed blade designed for clean cutting, the tenon saw also benefits from a stiffening rib which runs along the top of the tool and prevents it from wobbling during use.Here's our Quick Application Guide:
• Length - an important consideration, depending on the size of the material you are cutting. However, most tenon saws are generally manufactured around the 300mm mark.• TPI - TPI stands for Teeth Per Inch. Saws with a low TPI value will cut quickly but coarsely, while saws with a higher TPI count will cut slowly but produce finer cuts. Tenon saws usually start at around 10TPI which is generally considered a fine cut, and anything over this can be expected to give progressively cleaner results.